Make sure the vacuum is switched off.

If you want to give the brush a more thorough clean, use a damp, soft cloth to wipe away dirt (avoid cleaning products or detergents – just use plain water).Make sure that the brush is completely dry before re-inserting it into the vacuum though, otherwise more dirt will instantly stick to it.. Re-insert the brush bar into the vacuum.. You’ll need to insert the end of the brush opposite the side with the button first.

Once that end has been inserted, gently push the brush until you hear a satisfying click..Remember to replace the battery!.Keep in mind that the red lights indicating a blockage won’t switch off straight away.

It’ll take around 10 seconds for the lights to go out and the vacuum to restart after the jam has been resolved.. Related Article:.How to Empty The Gtech Multi Mk2.

What Should I Do If The Brush Still Won’t Spin?.

If the brush won’t spin after removing any tangles, you should double-check that the brush bar has been re-inserted correctly.It’s also a good idea to open all the windows and use a dehumidifier to bring humidity down to a safe level.. What About Damp Odours After a Flood?.

A damp smell is likely if the home has recently been flooded.In this situation the carpet may not be salvageable, so check with a professional to see whether the carpet needs to be replaced.. How to Get Rid of a Damp Carpet Smell With White Vinegar.

White vinegar is one of the best DIY products for.cleaning your carpet.